jocel JP1I009159 INDUCTION COOKER User Manual

jocel JP1I009159 INDUCTION COOKER

TECHNICAL SPECIFICATION

• Model JP1I009159
• Voltage/ Frequency 220~240V,50Hz
• Rated Power 2000W

SAFETY PRECAUTIONS

Please read carefully the following instructions before using the induction hob.

1. Do not plug with wet hands.
2. Do not modify the parts, or repair the unit by yourself.
3. Do not use the unit near flame or wet places.
4. Do not use where children can easily touch the unit, or allow children to use the unit by themselves.
5. Do not place on unstable surfaces.
6. Do not move the induction hob when you have the pan or pan.
7. Do not heat the induction hob while it is empty or overheat it.
8. Do not place metallic objects such as knives, forks, spoons, lids, cans, and aluminum foils on the top plate.
9. Caution, hot surface

OPERATION INSTRUCTION

1. Power on
   When powered on, the buzzer alerts, and the LED displays “—-“, the induction hob is ready for work.
2. Switch on
   After powering on, press the “ON/OFF” button, and the LED show an “ON”, power indicator light. The induction hob will be in standby mode.
3. Cook
   After switching it on, press “+” bottom, and the LED shows “1300”， the default power is 1300W, press “+” to increase the power and press“-” to reduce the power. The power range is 200- 500- 800- 1000- 1300- 1600- 1800- 2000.
4. Switch Off
   When in working mode, press the “on/ off” button, and the hob will stop working.

TYPES OF UTENSILS THAT CAN BE USED

1. Usable Pans
   Steel, cast iron, enameled iron, stainless steel, flat-bottom pans/pots with diameters from 12 to 26cm.
2. Non-usable Pans
   Heat-resistant glass, ceramic container, copper, aluminum pans/pots. Rounded-bottom pans/pots with a bottom measuring less than 12cm.

CLEANING & MAINTENANCE

1. Do not use benzine, thinner, scrubbing brush, or polishing powder to clean the induction hob.
2. Wipe using a dishwashing agent and a damp cloth.
3. Use a vacuum cleaner to suck up dirt from the air intake and exhaust vent.
4. Never run water over the unit (Water that gets inside may cause malfunction).

FAULT ANALYSIS FOR INDUCTION HOB

• E0: Check whether there is no pot or the pot is not acceptable
• E1: Check whether the Voltage is too low, lower than 88V
• E2: Check whether the Voltage is too high, higher than 280V.
• E3: Check whether the heat sensor is overheated or short-circuit.
• E4: Check whether the heat sensor is open or invalid.
• E6: Check whether IGBT is open or invalid.

CORRECT DISPOSAL OF THIS PRODUCT
This marking indicates that this product should not be disposed of with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmentally safe recycling.

GENERAL WARRANTY TERMS

1. The warranty is valid only on the presentation of the invoice of purchase.
2. This WARRANTY is limited exclusively to parts substitution ineffective due to faulty manufacture, made in our workshops.
3. The warranty does not cover damages for personal injury or damage caused directly or indirectly in any capacity whatsoever.
4. This warranty terminates when it is found to have been undergoing repairs, alterations, or interventions by any person not authorized by Jocel.

THE WARRANTY EXPIRES

1. With the modification or disappearance of the nameplate of the appliance.

TECHNICAL ASSISTANCE

For technical assistance requests, our services are available through the following contacts:
Telef. 00 351 252 910351
Fax: 00 351 252 910367
E-mail: assistencia@jocel.pt
http://www.jocel.pt

DOWNLOAD LINK

GET MANUAL