iOttie chwrio301 iON Wireless Charging Pad
iOttie chwrio301 iON Wireless Charging Pad User Manual.
Getting Started
Follow the detailed instructions within this manual when using the iON Wireless Plus Fast Charging Pad. Please make sure your device is Qi Wireless compatible. Compatible devices include iPhone X, 8 Plus, 8, Samsung Galaxy S9, S9+, Note 8, S8, S8+, S7, S7 Edge, S6, S6 Edge, and any other Qi-enabled devices. Not all smartphones can receive a wireless fast charge, however, they will receive a standard wireless charge. Check your phone’s charging features for fast charging capabilities. Please only use the included cable and power adapter. Third-party components may impact wireless charging performance. If using a third-party charger, please only use a Qualcomm Quick Charge 3.0 or equivalent adapter. Plugging the Charging Pad into the computer will not provide adequate power to support wireless fast charging. Please only plug directly into a Power Adapter. iOttie is not liable for possible damages due to product misuse.
At a Glance
What’s in the Box
Power adapter type may vary by country.
Key Features
Qi Wireless Fast Charging
Charge smartphones faster than a standard wireless charger. Max Wireless Charging Capacity: 7.5W iPhone, 10W Android
Charging Hub
Powerful 18W USB-C input allows simultaneous wireless and wired charging. Charge a second device via USB-A output. Max USB-A Charging Capacity: 12W
Heat Ventilation
The internal air vent structure reduces heat to maximize wireless charging efficiency.
Slip Resistant
The charging surface features an Anti-Slip Ring to prevent smartphones from shifting while charging wirelessly.
Preparation
Please only use the included cable and power adapter. Using third-party components may impact wireless charging performance.
- Plug the Charging Cable into the USB-C port on the back of the charging pad and connect the USB-A side to the Power Adapter.
- Plug the Power Adapter into an AC outlet. The Charging Indicator will turn on and then fade to inform you the pad has received power.
- Please do not plug the Charging Pad into a computer, as this will not provide adequate power to support wireless fast charging
Qi Alignment Guide
Use the guide below to receive an efficient wireless fast charge.
Qi Coil Location
The Qi coil is generally found in the center of most smartphone models.
Smartphone alignment
Center the back of the smartphone in the center of the Anti-Slip Ring for a fast and efficient wireless charge. Rest your smartphone on the charging surface parallel to the Charging Pad.
Troubleshooting
Your device’s screen will show that it is charging. If your phone is not charging, check the Charging Indicator on the front of the device:
- Fading White Light
When powered on, a white light will appear briefly and then fade. - Solid White Light
The white light will remain on if the phone is charging wirelessly. - Blinking Red Light
A blinking red light will appear if the phone is incompatible or the Qi coil is blocked.
Please contact customer service at cs@iottie.com if you have any questions.
Specifications
Charging Pad
ITEM DESCRIPTION
- INPUT
- 5Vm3A
- 9V-2A
- OUTPUT
- WIRELESS: 5V-1A / 9V-1A
- USB: MAX 5V-1A 5W
- LENGTH 4.4″
- WIDTH 2.7″
- HEIGHT 1.14
- WEIGHT 130g
Wall Charger
INPUT
- 110°250V
- 600mA
OUTPUT
- 3.6″6V-3A
- 6~9V-2A 9^12V-1.5A
Operational Warnings
- During the charging process, the transfer of electricity gives off heat. Your device may become warm, but should not become exceedingly hot.
- If the device gets wet, please cease charging immediately. Remove all plugs and dry the product completely. The device is only to be operated in a dry, indoor environment
- Please be careful of excessive drops, dents, punctures, or deformities on the device. If you are concerned, please unplug the device and contact the manufacturer
- Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
- Operating this device in a hot environment or direct sunlight for a long period may cause malfunctions. We recommend keeping the product in cooler temperatures.
- Please use the included components for an optimal experience. To support Qi fast charge when using a third-party car charger or a USB Power Adapter use a Qualcomm Quick Charge or 3.0 equivalent adapter.
- If your phone is misaligned when wireless charging, your device may become warm due to inefficient wireless output. It is important to always properly align your smartphone, especially when charging 2 devices via wireless and wired connection.
Declaration of Conformity FCC
NOTE: This equipment has been tested and found to comply with the limits for a wireless power charger, under Part 18 of the FCC Rules. These limits are designed to protect reasonably against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Consult the dealer or an experienced radio/TV technician for help.
CAUTION: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the product. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter
Manufacturer:
iOttie, Inc. 20 West 37th Street 6th Floor New York, NY 10018
