Insignia NS-IOPS22 2-Way Indoor Speakers User Manual

Insignia NS-IOPS22 2-Way Indoor Speakers

Insignia NS-IOPS22 2-Way Indoor Speakers User Manual.

PACKAGE CONTENTS

• 2-way indoor/outdoor multipurpose speakers (2)
• Adhesive-backed cushioned feet for speakers (8)
• Wall-mount brackets (2)
• Adhesive-backed cushions for mounting brackets (4)
• Screws (4)
• Knobs (4) (for wall mounting)
• Quick Setup Guide

FEATURES

• Weather-resistant for versatile use inside or outside
• Includes mounting brackets and hardware for easy installation
• Each speaker features one 4″ polypropylene woofer cone and one 1/2″ Mylar tweeter

CONNECTING YOUR SPEAKERS

Your speakers can be connected to an amplifier, receiver, or similar device. That device can be connected to your source device, such as a TV or turntable, to produce sound.

Note: We recommend using an 18-gauge or heavier speaker wire.

1. Connect the red (+) speaker terminals to the red (+) amplifier terminals.
2. Connect the black (-) speaker terminals to the black (-) amplifier terminals.

See the documentation that came with your amplifier or home theater system for more information on connecting the cables. Use the marked wire for the red (+) connections. You can position your speakers free-standing, or mount them to a wall.

POSITIONING YOUR SPEAKERS OPTIONAL

1. If not using the wall-mount brackets, attach the adhesive-backed cushioned feet to the base of the speakers.
2. Locate your speakers with enough distance between them to provide adequate left and right stereo separation (for optimum results, also make sure that the left channel speaker is on the left side and the right channel speaker is on the right).

INSTALLING WALL-MOUNT BRACKETS OPTIONAL

1. Screw the wall-mount brackets onto the wall where you want to mount the speakers.
2. Attach the adhesive-backed cushions to the brackets.
3. Slide a speaker into each mounting bracket.
4. Line up the screw holes (one on top, one on bottom), then screw a knob into each hole to secure the speaker to the bracket. You can loosen the knobs to adjust the direction the speakers are pointing.

TROUBLESHOOTING

No sound or low volume

• Make sure that all connections are tight and secure.
• Make sure that your speakers are connected to an amplifier or audio receiver.
• Make sure that your amplifier or audio receiver is connected to a source device such as a TV or turntable.
• Make sure that your sound source device is not muted or turn the volume up.

Sound is distorted
Try moving the speakers away from other devices or cables.

Sound is coming from one speaker only
Adjust the sound balance on your source device.

SAFETY INFORMATION

• Never set the volume above the point of audio distortion or you could damage your speakers very quickly.
• If you hear distortion, immediately turn down the volume.

SPECIFICATIONS

• Each speaker dimension (H × W × D) (without bracket): 7.4 × 4.7 × 4.1 in. (18.7 × 11.8 × 10.5 cm)
• Each speaker dimension (H × W × D) (with bracket): 8.3 × 4.7 × 6.1 in. (21 × 11.8 × 15.5 cm)
• Each speaker’s net weight (without bracket): 2.2 lbs (1 kg)
• Each speaker’s net weight (with bracket): 2.4 lbs (1.1 kg)
• 8-ohm nominal impedance
• 90 Hz – 20 kHz frequency response
• RMS power: 15 W × 2
• Peak power: 30 W × 2

Notes:

• Peak power refers to manufacturing testing standards and methods.
• Design and specifications are subject to change without notice.
• Operating temperature range: -40 °F~122 °F (-40 °C~+50 °C)

ONE-YEAR LIMITED WARRANTY

Visit www.insigniaproducts.com for details.

CONTACT INSIGNIA:
For customer service, call 1-877-467-4289 (U.S. and Canada) at www.insigniaproducts.com INSIGNIA is a trademark of Best Buy and its affiliated companies. Distributed by Best Buy Purchasing, LLC 7601 Penn Ave South, Richfield, MN 55423 U.S.A. ©2022 Best Buy. All rights reserved.

For more Manual

Download Link