ILIFE V7s Plus Vacuum Cleaner
Positioning the charging dock
Read all instructions before using the Vacuum Cleaner User Manual. Place the charging dock against a wall and plug the power cord into the outlet. Make sure to leave an uncluttered area about 1 meter on each side and 2 meters in front of the charging dock. Do not place the charging dock near doors, stairs, or on the shaggy carpet.
Read and Save ILIFE V7s Plus Vacuum Cleaner User Manual.
Wake up the battery and charge your robot
- Turn on the Power Switch on the bottom side of the robot, then the light will turn solid. Plug the adapter into the robot and outlet directly.
- Press on @ button on the remote control to make the robot return to the charging dock to charge itself.
V7s Plus is ready to clean
- Make sure the power switch is on.
Press the CLEAN button on the main body or on the remote control to start cleaning. If the robot is in sleeping mode, press the CLEAN button to wake up the robot from sleeping mode. Then press CLEAN again, and the robot starts cleaning automatically.
The robot will clean a room automatically and adjust its cleaning according to the situation Press the CLEAN button on the robot body or on the remote control to enter into Auto cleaning mode.
Important tips with V7s Plus
- Remove excess clutter from floors before cleaning. (e.g. electronic cords, toys, liquids, etc.
- For better cleaning performance, empty the dustbin and clean the filters after each use (filters can’t be washed with water). Replace with new filters when it is needed.
- In homes with heavily shedding pets, dustbins may fill quickly with fur or hair.
In these cases, you may need to empty the dustbin and clean filters more frequently. - Read and Save ILIFE V7s Plus Vacuum Cleaner User Manual.
