Orbegozo FO 1710 Stainless Gas Stove Burner
TECHNICAL DATA
- Category I3+
- Type of gas G30/G31
- Regulator. Supply pressure 28-30/37 bar
BURNER NOMINAL CONSUMPTION
Bottle capacity cannot exceed 10 kg—the rating plate with the characteristics found in the rear of the unit.
INSTALLING THE APPLIANCE
Before installing, make sure that the gas type and pressure and the appliance specifications are compatible. The appliance specifications must be written on the label (or the data plate). The support must resist a temperature of at least 80 degrees Celsius.
CONNECTING THE GAS
This appliance has a label, located on the back of the gas cooker, indicating the gas pressure. Before turning on the appliance, check it is compatible with the gas type and pressure available. To work, the stove must have:
- 1 bottle of gas, only bottled by Official Dealers, by the gas indicated on the data plate.
- 1 pressure regulator approved and indicated on the data plate.
- 1 flexible tube approved for gas, with a maximum length of 1.5 m.
- 2 screw clamps for the flexible tube.
Connect the flexible tube to the gas supply inlet on the stove and the regulator, ensuring tightness using the 2 screw clamps.
CHECKING CONNECTION TIGHTNESS
To do so, apply soapy water to the joints; if bubbles appear it means there is a leak.
NEVER USE A FLAME
WARNINGS FOR USE
If the stove has been moved, it will be necessary to check that the burner caps are properly fitted. The appliance runs on BUTANE or PROPANE gas 28‐30/37 mbar.
- The appliance and the gas bottle must be placed on a flat surface far away from flammable materials.
- Protect the bottle and the appliance from direct sunlight.
- The bottles must not be stored indoors, in an unventilated area, or a cellar.
- Keep children well away from this appliance.
IF YOU SMELL GAS:
- Turn off the burner
- Close the appliance gas supply (bottle tap)
- Contact your gas supplier or specialized personnel.
MAINTENANCE
- Verify the state of the flexible connection tube regularly and replace it whenever necessary (expiry date).
- To ensure proper functioning, once a year check the burner taps, if necessary, REPLACE THEM as follows
USER INDICATIONS
WARNING
- This appliance must be installed according to current regulations.
- Please read the instructions before installing and using this appliance.
- Do not move the appliance when in use.
- Close the gas supply to the bottle after use.
- Any modification of the appliance may be dangerous.
- This appliance must be kept away from flammable materials.
The bottle capacity can be no more than 10 kg. The data plate is on the back of the appliance.
WARNINGS FOR USE
- Protect the bottle and the appliance from direct sunlight.
- Keep children well away from this appliance
- Any modification or alteration could be dangerous.
FEATURES
- Automatic electronic ignition.
- The attractive top plate is, made of stainless steel.
- High-thermal heat and efficient burners
- Large trivets. You can accommodate a large pot and frying pan all at the same time.
- Detachable burner cap for convenient cleaning and maintenance.
PREPARATION
- Match properly your gas cylinder and gas regulator.
- Place your gas cooker on a level and firm location.
- Install burners in their place, each burner fixed in the hollow of its size.
- Place the saucer trays in their place, fixing them in their proper size.
HOW TO USE
To ignite the burners:
- You can find each knob in front of each burner.
- Open the main gas valve of the gas cylinder. Gently push the gas control knob in and turn it to the left until you hear the ignition click.
- Initial ignition will simultaneously light the inner small burner and outer big burner. To use the inner small burner only, turn the knob to the MIN position.
- Adjust the flame to suit cooking by turning the knob between the “ON” and “OFF” positions.
USE OF PAN
The most appropriate cooking point must be used according to the diameter of the pan. The flame must not exceed the diameter of the pan. Whenever possible, cover the pan with a lid to save energy.
Recommended pan diameter
- Burner Pan diameter
- Big 26-32 cm
- Medium 20-26 cm
- Small 14-18 cm
REGULATING THE FLAME
The flame can be regulated. The knob has the following symbols:
CLEANING-MAINTENANCE
- Enamel or painted parts: wash with soap and water, rinse, and dry with a soft cloth.
- Chrome-plated parts: wash with soap and water, rinse and dry. If necessary, use appropriate liquid detergents, but never abrasive ones.
- Burner: wash with soap and water and dry: after cleaning, make sure that all the flame-spreader holes are clean and unblocked.
- Clean all accessible burner parts after every use.
- Never leave any residue on the surface.
- WARNING: Never use abrasive detergent products
BURNER NOMINAL CONSUMPTION
Sonifer, S.A. Avenida de Santiago, 86 30007 Murcia España
E-mail: sonifer@sonifer.es
Made in P.R.C.
