Orbegozo CTP 3500 Waterproof Hair Trimmer
SAFETY INTRODUCTION
- Children must never play with the appliance.
- Keep the appliance and the cable cord out of the reach of children less than 8 years old.
- WARNING: To ensure your children‘s safety, please keep all packaging (plastic bags, boxes, polystyrene, etc.) out of their reach.
- If the supply cord is damaged it must be repaired by the Authorized Service Agent.
- Never pull on the cord when unplugging.
- Do not use the unit with a damaged cord or plug, or if it is not working properly.
- Do not handle the appliance with wet hands.
- Never immerse the appliance in water or any other liquid.
- This appliance is for household use only.
- In case you need a copy of the instruction manual, you can ask for it by writing an email to sonifer@sonifer.es.
WARNING
- Except when charging, always unplug this appliance from the electrical outlet immediately after use.
- Unplug this appliance before cleaning it.
- Keep the cord away from heated surfaces.
- Never drop or insert any object into any of the appliance’s openings.
- Always store this appliance and cord in a moisture-free area.
- Do not use this appliance with a damaged or broken cutter unit, as injury may occur.
- Do not use an extension cord or a voltage converter with this appliance.
- Do not wrap the cord around the appliance.
- Do not pull on the connection cord, but rather on the plug, to separate the appliance from the mains.
- Do not leave the appliance unattended when it is switched on, as this may be a source of danger
DESCRIPTION
- Guide-combs of 3/6mm and /12mm.
- Titanium coating fixed blade.
- Ceramic mobile blade.
- ON/OFF/LOCK push-button.
- Speed selector buttons (low, mid, high)
- Selected speed indicator.
- Battery level indicator.
- Battery low indicator.
- Blades lubricating indicator.
- Lock indicator.
- Precision cut knob, 5 levels (1, 1.2, 1.4, 1.6, 1.8mm).
- Charging adaptor connector.
- Cleaning brush.
- Lubricating oil.
- Charging adaptor.
NOTE: Guide combs give different lengths of cut by different sizes. To get used to this hair clipper, we advise you to start with a long length.
TECHNICAL SPECIFICATION
- Rated Voltage: 230V~ 50Hz
- Charging Time: 90 minutes
CHARGE THE HAIR CLIPPER
- Before charging, make sure the appliance is off.
- Plug in the output of the adaptor to the hair clipper and the adaptor to the main
- For full charging the battery needs 90 minutes.
- It is recommended, that you charge the appliance for 3 hours in the first charge, so the battery reaches maximum capacity. Note: This appliance can be used with cord and cordless.
HOW TO USE THE HAIR CLIPPER
- This appliance has 2 guide combs for different desired cuttings, one for 3/6mm and the other for 9/12mm. Choose a guide comb more suited to the desired cutting. In the below pi,c you can see how to place it.
- Press the ON/OFF/LOCK push-button to turn on the hair clipper.
- Cut the hair carefully to get the best result.
- This hair clipper has a powerful motor and you can adjust its power. Choose the power depending on your kind of hair, hair density, etc. so the cutting will be the best possible. Press the button “+” to increase the power and press the button “-“ to decrease the power.
- The mobile blades can be regulated to get precision cutting. The range is the following: 1, 1.2, 1.4, 1.6, 1.8mm. Choose the size that adjusts your desired cutting. For changing the length of precision cutting turn left or right on the knob on the back side of the hair clipper.
Attention: add oil to the blade before and after every use or when the hair clipper advises you with an indicator light in the LED display, so you will keep the blade in good condition. Otherwise, the cutting will lose quality and reduce the useful life of blades and, therefore, hair clippers. How to add oil:
Attention: adjust set precision cutting to size 1.8mm (longer size) before installing the blade in the hair clipper. - This appliance has a lock function. If you are not going to use a hair clipper for a time, take it on a trip or for security to avoid children turning it on, please, lock the appliance. For locking the hair clipper, keep pressing the ON/OFF/LOCK button for 3 seconds until the LED display shows the lock symbol.
DESCRIPTION OF LED DISPLAY
- The LED display will light up completely when you connect the adaptor to the hair clipper. After that, the battery of the clipper starts charging and the LED display will show the numbers from 0 to 100 depending on the charge level and it will increase while it is charging.
- The LED display will show 100 when the battery is completely charged. The LED display will turn off 5 minutes after the battery is completely charged.
- When you are using the clipper, indicator numbers of battery level will decrease from 100 to 0%. The battery symbol will blink when the battery level is 10%; the appliance will turn off automatically when the indicator reaches 0% and cannot turn on again if you don’t recharge it or plug it in the mains with an adaptor.
- Please, add oil to the blade when its indicator light reminds you of the LED display.
- The LED display also shows selected power cutting. The lower level will show 1 bar, the middle level with 2 bars, and the high level with 3 bars.
Important advice before cleaning
- Ensure the hair clipper is off and unplugged.
- Clean appliance Surface with a wet soft cloth, don’t use abrasive detergents.
- Do not wipe the appliance with a hair dryer or something like that, for wiping use a dry cloth.
How to clean
- Clean cutting head with a brush if there is little hair in the blades.
- Remove the cutting head pressing the blade out to clean the accumulated hair inside the head, and use a brush for it.
- This hair clipper is waterproof. If there is much accumulated hair on the head, it is recommended to remove the head and clean it with and hair clipper with water.
OTHER ADVICE
- The useful life of the blade is estimated at 18 months in the following conditions: you use the hair clipper for 5 minutes, every day.
- Change the blade if you observe it is dull (it could pull off hair while you are cutting).
- We highly recommend brushing away the hair residual from the blade regularly, or it may affect the cutting performance and shorten the life of the blade.
- We recommend charging the hair clipper at least once per month to keep the battery active even if the appliance is going to be unused for a long time, it can extend the life of the battery.
Disposal of old electrical appliances
The European directive 2002/96/EC on Waste Electrical and Electronic Equipment (WEEE), requires that old household electrical appliances must not be disposed of in the normal unsorted municipal waste stream. Old appliances must be collected separately to optimize the recovery and recycling of the materials they contain and reduce the impact on human health and the environment. The crossed-out “wheeled bin” symbol on the product reminds you of your obligation, that when you dispose of the appliance, it must be separately collected. Consumers should contact their local authority or retailer for information concerning the correct disposal of their old appliance
DECLARATION OF CONFORMITY
This device complies with the requirements of the EMC directive 2014/30/EU.
