Miele APLW 868 Batter and Charging Station
Miele APLW 868 Batter and Charging Station User Manual.
Important warnings
This alerts you to the potential danger of injury to people or property damage. Read these warning notes carefully and observe the procedural instructions and codes of practice they describe.
Notes
Information of particular importance that must be observed is highlighted in a thick-framed box.
Additional information and comments
Additional information and comments are contained in a simple frame.
Operating steps
Operating steps are indicated by a black square bullet point.
Example:
Select an option using the arrow buttons and save your choice with OK.
Display
Certain functions are shown in display messages using the same font as that used for the function itself in the display.
Queries and technical problems
In the event of queries or technical problems, please contact Miele.
Warning and Safety instructions
Dispose of the rechargeable battery immediately. Batteries will deplete over time. They can then leak corrosive fluids. Avoid contact with the eyes and skin. In the event of contact, rinse thoroughly with water and seek medical advice. Disposing of the rechargeable battery: remove the rechargeable battery from the transfer trolley. Insulate the metal contacts with adhesive tape to prevent short circuits. Dispose of the rechargeable battery in a municipal recycling facility. Do not heat the rechargeable battery. Do not expose the rechargeable battery to direct sunlight.
Product Description
APLW 868 charging station
It is a switched-mode power supply charger (SMPS) which makes the battery charging process more efficient.
- Green LED (lights up when the power supply is connected)
- Yellow LED (lights up when the battery is charging)
The battery module takes less time to charge with the charger
Caring for the environment
Disposal of the packing material
Recycling the packaging reduces the use of raw materials in the manufacturing process and also reduces the amount of waste in landfill sites.
Disposing of your old machine
Electrical and electronic machines often contain valuable materials. They also contain materials that, if handled or disposed of incorrectly, could be potentially hazardous to human health and the environment. They are, however, essential for the correct functioning of your machine. Please do not therefore dispose of it with your household waste.
Please dispose of it at your local community waste collection/recycling center or contact your dealer for advice.
Installation
APLW 868/APLW 869 installation
- Select an accessible position on the wall for the charging station.
- Use the diagram to position the screws (not included in the scope of delivery) at the correct intervals on the wall (140 mm), no.
- Use the mounting screw (included in the scope of delivery) to attach the charger to the wall bracket, no.
- Hook the charging station (now attached to the wall bracket) onto the screws on the wall by the lugs, no.
Tighten the mounting screws for the charger to a maximum tightening torque of 1 Nm.
- Plug the APLW 869 into the charging station, positioned vertically upright.
Charging is automatic. - Unplug the battery from the charging station.
Technical data
