jocel JCA002105 AIR COOLER
jocel JCA002105 AIR COOLER User Manual.
IMPORTANT GUIDELINES
When using electrical appliances basic safety precautions should always be followed including the following:
- Read all instructions before using.
- Check the household voltage to ensure it matches the appliance’s rate specifications.
- Always turn the setting controls to the “0” position before disconnecting the cord from the power supply. Hold plug when unplugging from a socket. Do not unplug by pulling the supply cord.
- Do not touch the wire connector with wet hands to avoid electric shock or injuries.
- Always unplug the product before refilling the water tank.
- Always unplug the appliance from the power source before cleaning, servicing, or relocating the unit.
- Do not use the product in areas where gasoline, paint, or other flammable goods and objects are stored.
- When using the “ ” setting, check to ensure the water tank has enough water to operate. Operating this cooler on the “ ” setting with an empty tank may result in damage to the water pump.
- Do not attempt to repair or adjust any electrical or mechanical functions of the cooler, as this may make the warranty void.
- Do not cover the air inlet or outlet of the appliance as this may cause damage.
THE WARRANTY EXPIRES
- With the modification or disappearance of the nameplate of the appliance.
- Exceeded 2 years for home appliances and 06 months for industrial appliances, warranty expires and assistance will be made by charging the costs of manpower, according to current fees.
PARTS INTRODUCTION
- Control panel
- Horizontal louvers
- Vertical louvers
- Casters
- Ice boxes
- Honeycomb filter
- Air filter
- Water tank
TECHNICAL SPECIFICATIONS
WORKING PRINCIPLES OF AIR COOLER
- Evaporative air coolers are built to maximize energy efficiency and keep costs low.
- Warm air is drawn into the cooler and enters the honeycomb cooling media. Water pumped from the tank pours over the honeycomb media (Fig.1).
- As the warm air passes through the media, the water absorbs the heat, naturally cooling and humidifying the air (Fig. 2).
- A fan propels the cooled air out into the room. This no-compressor system cools naturally, efficiently and inexpensively.
The recommended maximum relative humidity level is 60% or less, which allows a noticeable temperature decrease. The temperature decrease will be greater in drier climates because higher evaporation occurs when the humidity is low.
- The evaporative air cooler should not be used in enclosed spaces. It must be kept level and there must be water in the water tank. The room should have doors and windows opened to allow free airflow.
- The evaporative air cooler works best when placed near an open window, so that outside air that is drawn into the evaporative air cooler circulates in the room, and then exits via the door.
BEFORE THE FIRST USE
- Please read these instructions carefully before using this appliance and keep them for future reference.
- Check whether the supply line voltage and current rating comply with the rated electric parameter shown on the label before inserting the main plug into the socket.
- Please check whether all the parts of the appliance are in good condition. If any parts are broken or damaged, please contact the Technical Assistance.
- Ensure all packaging materials and any promotional labels or stickers are removed from the appliance before the first use.
HOW TO USE THIS AIR COOLER
Control Panel
- Speed:
- Press the “1” “2” and “3” buttons to change speed. The “0” button is for turning the unit OFF.
- “0” – Off
- “1”- Minimum
- “2”- Medium
- “3”-Máximum
Cool
Press the “Cool” button repeatedly to choose the desired function. the functions can operate simultaneously. To begin cooling the desired area, press the button on ”COOL” is on. Water pump will start to operate and you will feel the cooler air after the honeycomb media is completely wet.
Swing
When the “Swing” function is chosen, the vertical louvers will automatically move from right to left, but the horizontal louvers must be manually adjusted to change the airflow direction to the top, center, or bottom.
Filling with water
Caution: Always unplug from the power supply when filling with water. – Check the the water level indicator located on the front of the unit to determine the level of water inside the water tank. Be sure the water in the tank is always above the minimum water level mark. – To fill the water tank, remove the water tank and fill the water to the maximum level, as indicated on the water tank. Do not fill water above the maximum water level mark.
– For better cooling performance, it is recommended to put an ice pack in the water tank. – After refilling the water tank and placing the ice packs, close the water tank, connect to the power supply, and turn it on. – To drain water from the tank, remove the rubber plug from the drain hole on the side. After draining the water, cover the hole with the cap.
Caution: Running the unit with inadequate water may cause pump failure.
CLEANING AND MAINTENANCE
- Before cleaning the unit, switch it to the off position and unplug from the power supply.
- Use a damp cloth to remove dirt and dust from the outer surface.
- Never use corrosive elements or any chemicals to clean this product
- Remove the filter and honeycomb filter from its shell for cleaning.
- Wash the filter in a mild detergent and warm water solution. Then rinse in clean water.
- Use a brush and water to clean the honeycomb filter
- Do not run the unit in mode with stale water in the tank. Empty the tank and refill it with fresh water if water has been standing in the tank for an extended period.
- When the product is not in use, store the unit in a dry place out of direct sunlight
TROUBLESHOOTING
TECHNICAL ASSISTANCE
- Telef. 00 351 252 910351
- Fax: 00 351 252 910367
- E-mail: assistencia@jocel.pt
- http://www.jocel.pt
