Eufy Video Doorbell 2K Battery Powered User Manual

Eufy Video Doorbell 2K Battery Powered

Eufy Video Doorbell 2K Battery Powered User Manual.

WHAT’S INCLUDED

For Video Doorbell Installation

For Homebased 2 Installation

PRODUCT OVERVIEW

Video Doorbell (Battery Powered)

Front view:

1.  Motion Sensor
2.  Microphone
3.  Camera Lens
4.  Ambient Light Sensor
5.  LED Ring
6.  Doorbell Button
7.  Speaker

Rear View:

1.  Micro USB Charging Port
2.  SYNC/RESET Button
3.  Power Terminals for Existing Doorbell Wire (Optional)
4.  Detaching Mechanism

Video Doorbell (Battery Powered)

1.  Status LED
2.  Speaker
3.  Power port
4.  USB port
5.  Ethernet port
6.  SYNC/ALARM OFF button
7.  Reset button

HOW THE SYSTEM WORKS

How the System Works The video doorbell system includes 2 parts. One is the video doorbell at your door. The other is the Homebased in your house. The video doorbell detects motion on your porch and allows you to answer the door anytime and anywhere. The Homebased stores video clips on its built-in storage. When someone rings the doorbell, people in the house will be notified.

1 CONNECTING THE HOMEBASE

1. Connect the Homebased 2 to the Internet
2.  Power on the Homebased 2, then use the ethernet cable provided to connect the Homebased 2 to your home router.
3.  The LED indicator turns blue (this may take up to 1min) when Homebased 2 is ready for setup.

2 SETTING UP THE SYSTEM

Download the App and Set up the System Download the Eufy Security app from the App Store (iOS devices) or Google Play (Android devices).

Sign up for a Eufy Security account, then follow the onscreen instructions to complete the setup

3 DETERMINING THE POWER OPTION

Battery Powered

1.  If you don’t have existing doorbell wiring at the front door, use the built-in battery. You are free to determine the doorbell position and the mounting is easy and quick.
2.  When the doorbell battery level is low, you need to detach and charge it.
3.  If you choose this option, please jump to STEP 4 FINDING A MOUNTING SPOT.

Doorbell Wire Powered

1.  If you have existing and working doorbell wiring at the front door, the doorbell will be powered by the wires constantly. So you don’t need to detach and charge it after installation.
2.  If you choose this option, please jump to Appendix 3 Powering the Doorbell with Doorbell Wires.

4 FINDING A MOUNTING SPOT

Find a Mounting Spot Take the video doorbell to your front door and check the live view on the App at the same time. Find a location where you can get the desired field of view.
Consider the below factors:

1.  Check if you can reuse the existing holes and anchors on the wall or door frame.
2.  If you want to place the doorbell close to a side wall, make sure the wall doesn’t show up in the field of view. Otherwise, IR light will be reflected and night vision will become blurry.
3.  If you are drilling the mounting holes for the first time, the recommended mounting height is 48″ / 1.2 m from the ground.
4.  Use the 15° mounting wedge as a supplementary mounting bracket if you wish to see more on a specific side.

Place the Screw Hole Positioning Card against the wall to mark the position. What is required: Screwdriver, Mounting Bracket, 15° Mounting Wedge (Optional), Screw Packs

Mount the Doorbell on Surfaces Made Out of Hard Materials

1.  If you’re mounting the doorbell on a surface made out of hard materials, like brick, concrete, or stucco, drill 2 holes through the Screw Hole Positioning Card with a 15/64”(6mm) drill bit.
2.  Insert the provided anchors, and then use the provided long screws to secure the Mounting Bracket on the wall.

What is required: Power Drill, 15/64”(6 mm) Drill Bit, Mounting Bracket, 15° Mounting Wedge (Optional), Screw Packs

STEP 6 MOUNTING THE DOORBELL Mount the Doorbell

Align the doorbell on top and then snap it on the bottom. Press it down until it clicks into place.

APPENDIX 1 DETACHING THE DOORBELL

Detach the Doorbell

1.  Use the doorbell detaching pin provided if you wish to detach the doorbell from the Mounting Bracket.
2.  Press and hold the hole on the bottom of the doorbell and then lift its bottom to take it off.

What is required: Doorbell Detaching Pin

APPENDIX 2 RECHARGING THE DOORBELL
Recharge the Doorbell

APPENDIX 3 POWERING THE DOORBELL WITH EXISTING DOORBELL WIRES

1.  Verify whether the doorbell wires are working
2.  Ring the existing doorbell to check if it is working. If the doorbell doesn’t ring, your doorbell wires may be defective. Power the doorbell on its battery or consult an electrician to fix the wires.
3. 2. Shut off the power at the breaker. Turn the lights on / off in your home to make sure the electricity in your house is properly shut off.

What is required: Philips-Head Screwdriver

3.3 Find a Mounting Spot

Determine the mounting position of the doorbell. Consider the below factors:

1.  Check if you can reuse the existing holes and anchors on the wall or door frame.
2.  If you are drilling the mounting holes for the first time, the recommended mounting height is 48″ / 1.2 m from the ground.
3.  Use the 15° mounting wedge as a supplementary mounting bracket if you wish to see more on a specific side.

Place the Screw Hole Positioning Card against the wall to mark the position

3.4 Mount the Bracket

If you’re mounting the doorbell on a wooden surface, you don’t need to pre-drill pilot holes. Use the provided screws to secure the Mounting Bracket on the wall. The Screw Hole Positioning Card indicates the position of the screw holes.
What is required: Power Drill, Mounting Bracket, 15° Mounting Wedge (Optional), Screw Packs

If you’re mounting the doorbell on a surface made out of hard materials, like brick, concrete, or stucco:

1.  Drill 2 holes through the Screw Hole Positioning Card with a 15/64”(6mm) drill bit.
2.  Insert the provided anchors, and then use the provided long screws to secure the Mounting Bracket on the wall.
   What is required: Power Drill, 15/64”(6mm) Drill

3.5 Connect the Doorbell Wires to the Doorbell

Connect the wires to the terminals at the back of the doorbell, then tighten the terminal screws. Wire can connect to any terminal. What is required: Wires and Wire Nuts (Optional), Video Doorbell, Philips-head Screwdriver

3.6 Mount the Doorbell on the Bracket

Align the doorbell on top and then snap it on the bottom

3.7 Restore Power

Switch the master circuit breaker back to ON.

NOTICE

FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Company Name: POWER MOBILE LIFE, LLC
Address: 400 108th Ave NE Ste 400, Bellevue, WA 98004-5541
Telephone:1-206-383-8247

Declaration of Conformity

Hereby, Anker Innovations Limited declares that this device complies with the essential requirements and other relevant provisions of Directive 2014/53/EU. For the declaration of conformity, visit the Web site:https://www.eufylife.com/. This product can be used across EU member states.

CUSTOMER SERVICE

•  Warranty
• 12-month limited warranty
•  Call Us
• United States +1 (800) 988 7973 Mon-Fri 9 AM-5 PM (PT)
• United Kingdom +44 (0) 1604 936 200 Mon-Fri 6AM-11AM (GMT)
• Germany +49 (0) 69 9579 7960 Mo-Fr 6:00-11:00
•  Email Us
• Customer Support: support@eufylife.com
• Anker Innovations Limited
• Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon,
• Hong Kong

Download PDF

For More Manual