Eufy S220 Solo Wireless Security Cam User Manual

Eufy S220 Solo Wireless Security Cam

PRODUCT OVERVIEW

T8134 S220 SoloCam

1. Solar Panel
2. Photosensitive Sensor
3. Microphone
4. Camera Lens
5. LED Indicator
6. Motion Sensor
7. Speaker
8. SYNC Button
9. USB-C Charging Port
10. Mounting Hole

CHARGING SOLO CAM

LED Indicator

SETTING UP SOLO CAM

Download the App and Set Up the Device

1. Download and install the eufy Security app, and sign up for an account.
2. Follow the on-screen instructions to add your SoloCam.

MOUNTING SOLO CAM

Select a Location
S220 SoloCam can be mounted on a wall. Select a location where it achieves the desired view. We recommend mounting it 7-10 ft (2-3 m) above ground level. To maximize the solar panel efficiency, select a location where the S220 SoloCam receives plenty of sunlight.

Mount S220 SoloCam
S220 SoloCam can be mounted both indoors and outdoors.

1. Loosen the cover of the mount by turning it counterclockwise and disassemble the mount
2. This step applies if mounting onto hard surfaces such as brick or concrete. For soft surfaces such as wood, skip this step. Drill holes with a 15/64 in (6 mm) drill bit, then insert the anchors into the holes.
3. Firmly screw the base of the mount onto the wall. Reassemble the mount.
4. Screw SoloCam onto the mount. Ensure the solar panel is facing the sky. Position SoloCam to achieve the desired view, checking it using the live stream in the eufy Security app

For troubleshooting, check the Help section in the eufy Security app

SAFETY

The recommended temperature range for devices and accessories is -20°C to 50°C (-4°F – 122°F). Unless specifically indicated that it is safe to do so in the user guide or instruction manual, do not use this device in an environment that exceeds the recommended low or high temperature. Unless specifically indicated that it is safe to do so in the user guide or instruction manual, avoid exposing your device to direct sunshine or excessively wet environments. It is recommended to supply the device in an environment with a temperature that ranges from 5°C ~ 25°C. When supplying, please place the device in an environment that has a normal room temperature and good ventilation.

CAUTION!
THERE IS A RISK OF EXPLOSION IF AN INCORRECT BATTERY TYPE IS USED. DISPOSE OF USED BATTERIES ACCORDING TO THEIR INSTRUCTIONS.

Warning:

• Replacing a battery with an incorrect type may bypass safeguards and create danger;
• Disposal of a battery in a fire or other source of significant heat, or by crushing, or cutting, may result in an explosion as well as leakage of flammable liquids and gases;
• Leaving a battery in an extremely hot environment may result in an explosion as well as leakage of flammable liquids and gases;
• A battery subjected to extremely low air pressure may result in an explosion as well as leakage of flammable liquids and gases

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and the receiver.
3. Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
4. Consult the dealer or an experienced radio/TV technician for help.

• Company Name: POWER MOBILE LIFE, LLC
• Address: 10900 NE 8TH ST, STE 501, BELLEVUE, WA 98004
• Telephone: 1-800-988-7973

Declaration of Conformity

Hereby, Anker Innovations Limited declares that this device complies with the essential requirements and other relevant provisions of Directive 2014/53/EU. For the declaration of conformity, visit the Web site: https://uk.eufylife.com/. RF exposure information: The Maximum Permissible Exposure (MPE) level has been calculated based on a distance of d=20 cm between the device and the human body. To maintain compliance with RF exposure requirements, use products that maintain a 20cm distance between the device and the human body. Wi-Fi Operating Frequency Range: 2412~2472MHz; Wi-Fi Max Output Power:19.65 dBm The following importer is the responsible party (contact for EU matters only) Anker Innovations Deutschland GmbH I Georg-Muche-Strasse 3, 80807 Munich, Germany This product complies with the radio interference requirements of the United Kingdom Hereby, Anker Innovations Limited declares that this product complies with Radio Equipment Regulations 2017(SI2017/1206).

The full text of the UK Declaration of Conformity is available at the following internet address: https://uk.eufylife.com. Proper disposal and recycling help protect natural resources, human health, and the environment. For more information on the disposal and recycling of this product, contact your local municipality, disposal service, or the shop where you bought this product. This product complies with the radio interference requirements of the European Community. This product complies with the radio interference requirements of the European Community.

CUSTOMER SERVICE

12-month limited warranty support@eufylife.com

Anker Innovations Limited Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong

Download link

For More Manual

Copyfish

 

OCR Result(Auto-Detect)

N/A

Translated(English)

N/A

Redo OCR Recapture Re-Translate Copy to clipboard