You are currently viewing D-Link DFE-520TX 32-bit PCI Network Adapter User Manual

D-Link DFE-520TX 32-bit PCI Network Adapter User Manual

D-Link-logo

D-Link DFE-520TX 32-bit PCI Network Adapter

D-Link-DFE-520TX-32-bit-PCI-Network-Adapter-product

D-Link DFE-520TX 32-bit PCI Network Adapter User Manual.

Introduction

Thank you for choosing the D-Link DFE-520TX, the value leader among Fast Ethernet adapters for PCI Bus personal computers. This introduction gives a general description of the newer networking technologies found on the DFE-520TX. The DFE-520TX provides IEEE 802.3x Flow Control Enhancements, which are needed for a network adapter to function with a switch. In full-duplex mode, the MAC implements the PAUSE control function.

System Requirements

Before installing the DFE-520TX, check your system for the following minimum configuration requirements.

  • One of the following slot types:
    • An open PCI bus master slot, 32-bit, operating at 33MHz.
  • 32 MB of System Memory
  • 150 MHz processor, or faster
  • The latest BIOS for your computer
  • One of the following types of twisted-pair network cabling:
    • Category 5 or better for 100Mbps
    • Category 3, 5, or better for 10Mbps
Features

Designed for versatility and performance, the DFE-520TX Network Adapter provides the following:

  • Operability in 32-bit, 33 MHz slot servers and workstations
  • Universal Bus support 3.3V
  • Plug-and-Play installation
  •  Supports for full-duplex double network throughput
  • Supports 802.3x flow control
  • Supports ACPI 2.0
  •  One built-in RJ-45 connector

Installation

Unpack and Inspect

CAUTION:

Under ordinary circumstances, a DFE-520TX card will not be affected by a static charge that may be received through your body during the handling of the unit. In special circumstances, the user may carry an extraordinarily high static charge and it is good practice to reduce the charge by touching the ground before handling the adapter card. Open the shipping carton and carefully remove all items. Ensure that the following items are included:

  • One DFE-520TX PCI Fast Ethernet Adapter Card
  • DFE-520TX Drivers and Manual on CD-ROM

Software Installation

You must install the driver software for your DFE-520TX before installing the PCI card into your PC. Insert the CD into your PC’s CD-ROM drive. It should begin running the driver installation program if you have auto-execute enabled. When the screen shown below appears, click the Install Driver link.D-Link-DFE-520TX-32-bit-PCI-Network-Adapter-fig-1

If you do not have auto-execute enabled for your PC’s CD-ROM drive, navigate to the root directory of the CD using Windows Explorer and click on the file named Autorun.exe. When the driver installation program (shown above) is complete, you can then install the PCI card inside your PC. When you restart your PC, the DFE-520TX will be ready to use.

Installing the Adapter
  1. Shut down the computer, unplug its power cord, and remove the chassis cover.
  2. Insert the contact edge of the DFE-520TX card into the connector of any available PCI Bus Master expansion slot.
  3. Install the bracket screw that secures the card to the computer chassis.
  4. Replace the computer’s chassis cover.
  5. Reconnect the computer’s power cord, and switch the computer’s power on. If the BIOS section of your computer’s boot program is Plug-and-Play compliant, then at power-up the BIOS will automatically configure any newly installed DFE-520TX adapter.

Connecting the Network Cable

Category 5 UTP cable qualifies for both 100BASE-TX Fast Ethernet and 10BASE-T Ethernet cabling rules. The maximum length of any single cable segment is 100 meters. Please keep in mind, however, that the maximum cable run between any two stations in a collision domain is 205m.

Troubleshooting

If you experience any problems with the adapter, check to see:

  • that the appropriate driver is loaded;
  • that the proper grade of cable is employed for the network connection;
  • that the supporting hub is properly qualified for the application.

Specifications

EMC And Safety Certifications:

  • FCC Class B
  • CE Class B
  • C-Tick

Environment:

  • Storage: −25° to 55°C (-13° to 131° F)
  • Operating: 0° to 40° C (32° to 104° F)
  • Humidity: 5% to 90% non-condensing
  • Power Consumption: 0.4W

WARRANTY

Subject to the terms and conditions set forth herein, D-Link Systems, Inc. (“D-Link”) provides this Limited Warranty:

  • Only to the person or entity that originally purchased the product from D-Link or its authorized reseller or distributor, and
  • Only for products purchased and delivered within the fifty states of the United States, the District of Columbia, U.S. Possessions or Protectorates, U.S. Military Installations, or addresses with an APO or FPO.
Limited Warranty

D-Link warrants that the hardware portion of the D-Link product described below (“Hardware”) will be free from material defects in workmanship and materials under normal use from the date of original retail purchase of the product, for the period set forth below (“Warranty Period”), except as otherwise stated herein.

  • Hardware (excluding power supplies and fans): One (1) year
  • Power supplies and fans: One (1) year
  • Spare parts and spare kits: Ninety (90) days

The customer’s sole and exclusive remedy and the entire liability of D-Link and its suppliers under this Limited Warranty will be, at DLink’s option, to repair or replace the defective Hardware during the Warranty Period at no charge to the original owner or to refund the actual purchase price paid.

Non-Applicability of Warranty

The Limited Warranty provided hereunder for Hardware and Software portions of D-Link’s products will not be applied to and does not cover any refurbished product and any product purchased through the inventory clearance or liquidation sale or other sales in which D-Link, the sellers, or the liquidators expressly disclaim their warranty obligation about the product and in that case, the product is being sold “As-Is” without any warranty whatsoever including, without limitation, the Limited Warranty as described herein, notwithstanding anything stated herein to the contrary.

Submitting A Claim:

The customer shall return the product to the original purchase point based on its return policy. In case the return policy period has expired and the product is within warranty, the customer shall submit a claim to D-Link as outlined below:

  • The customer must submit with the product as part of the claim a written description of the Hardware defect or Software nonconformance in sufficient detail to allow D-Link to confirm the same, along with proof of purchase of the product (such as a copy of the dated purchase invoice for the product) if the product is not registered.
  • The customer must obtain a Case ID Number from D-Link Technical Support at 1-877-453-5465, who will attempt to assist the customer in resolving any suspected defects with the product. If the product is considered defective, the customer must obtain a Return Material Authorization (“RMA”) number by completing the RMA form and entering the assigned Case ID Number at https://rma.dlink.com/.
Disclaimer of Other Warranties:

EXCEPT FOR THE LIMITED WARRANTY SPECIFIED HEREIN, THE PRODUCT IS PROVIDED “AS-IS” WITHOUT ANY WARRANTY OF ANY KIND WHATSOEVER INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT.

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communication.

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and the receiver.
  • Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

For detailed warranty information applicable to products purchased outside the United States, please contact the corresponding local D-Link office.

Product Registration

Register your D-Link product online at http://support.dlink.com/register/
Product registration is entirely voluntary and failure to complete or return this form will not diminish your warranty rights.

Worldwide offices URL

Downloaded from www.Manualslib.com manuals search engine

For More Manuals

Leave a Reply