Cuisinart CSG-466 Digital Folding Thermometer User Manual

Cuisinart CSG-466 Digital Folding Thermometer User Manual.

Remove the silicone shield to access the battery door on the back of the thermometer. Slide the door away to install batteries. 2 AAA – not included
Power the thermometer on after the batteries are installed, all functions will show on the display for 1 second, and start to measure the environment’s temperature. Also, the LED background light is on for 5 seconds.
Default temperature setting: °F (see Figure 1)

3.1.1 ON/OFF button
Press the ON/OFF button one time to power it on. Press the ON/OFF button one time to power off.
3.1.2 °F/°C button
Press this button one time to exchange °F/°C. • After exchange, the degree will not be reserved, it will show °F when you power on again.
3.1.3 HOLD button
Press this button to show the max tested temperature, and press again to show the min tested temperature. press once more back to the current temperature. When showing max/min temperature, if there is no
operation within 5 seconds, it will go back to the testing position automatically.
3.1.4 LIGHT button
Press this button to turn on the LED light, and press again to turn off the LED light.

4.1.1Temperature
Temperature measurement range: -40°C~+250°C or -104°F~+482°F
Measure period: 1 second, temperature resolution:0.1°F
Default temperature setting: °F
Accuracy:+/-1
It shows “HI “when the tested temperature is over the MAX temperature, and it shows “LO” when the tested temperature is below the MIN temperature.
4.1.3 Backlight function
Push the °F/°C or “HOLD” button once, and the LED lights on for 5 seconds. When the power is on, it lights on for 5 seconds.