CONAIR SHV1000 Rotary Shaver User Manual

CONAIR SHV1000 Rotary Shaver

Read the CONAIR SHV1000 Rotary Shaver User Manual.

IMPORTANT SAFETY INSTRUCTIONS

When using electrical appliances, especially when children are present, basic safety precautions should always be taken, including the following:

DANGER –

Any appliance is electrically live, even when the switch is off. To reduce the risk of death or injury by electric shock:

1. Always unplug the appliance from the electrical outlet immediately after use (except when charging the unit).
2. Do not place or store appliances where they could fall or be pulled into a tub or sink.
3. Do not use appliances while bathing or in the shower.
4. Do not place the appliance in, or drop it into water or other liquids.
5. If the appliance has fallen into the water, do not reach for it. Unplug immediately.
6. Unplug this appliance before cleaning.

WARNING –

To reduce the risk of burns, electric shock, fire, or injury to persons:

1. Never leave a plugged-in appliance unattended
2. This appliance should not be used by, on, or near children or individuals with certain disabilities.
3. Use the appliance only for its intended use as described in this manual. Use only attachments recommended by the manufacturer. Do not use an extension cord to operate the appliance.
4. Never operate the appliance if it has a damaged cord or plug, is not working properly, has been dropped or damaged, or dropped into water. Return the appliance to a Conair Service Center for examination and repair.
5. Keep the appliance cord away from heated surfaces.
6. Do not pull, twist, or wrap the cord around the appliance.
7. Never drop or insert any object into any opening on the appliance.
8. Do not place the appliance on any surface while it is operating.
9. Do not use the appliance with a damaged or broken comb or with teeth missing from the blades, as injury may result. Before each use, make certain the blades are aligned properly and oiled.
10. Do not use the appliance outdoors where aerosol (spray) products are being used or where oxygen is being administered.
11.  This appliance is not a toy. Keep away from children.
12. THIS PRODUCT IS FOR HOUSEHOLD USE ONLY.

SAVE THESE INSTRUCTIONS

USER MANUAL

Before using the Class 2 Power Supply, Read these instructions carefully.

Use with adapter CA10 Rated input voltage: 100–240V AC, 50/60Hz 0.2A Rated output: 3.0V DC 1000mA

CAUTION

1. The unit will become warm during operation.
2. Dry location use only. Do not be exposed to liquids, vapor, or rain.
3. Ensure the jack is plugged into the shaver unit before plugging the adapter into the outlet.
4. Do not operate any appliance that has a damaged output cord or housing.
5. Always unplug the unit before cleaning or when not in use.
6. This power unit is intended to be correctly oriented in a vertical or floor-mount position.
7. Be sure the voltage is correct before plugging in. For connection to a power supply not in the U.S.A., use an attachment plug adapter of the proper configuration for a power outlet. The adapter included automatically adjusts to the input voltage. DO NOT USE WITH A VOLTAGE CONVERTER.

FEDERAL COMMUNICATIONS COMMISSION NOTICE

WARNING:

Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

NOTE:

This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

SUPPLIER’S DECLARATION OF CONFORMITY

• Brand: CONAIR FOR MEN
• Model No.: SHV1000
• Description: Shaver
• Responsible Party: Conair Corporation,

1 Cummings Point Road, Stamford, CT 06902 (203) 351-9000 Standards: FCC Part 15 Subpart B, ANSI C63.4-2014 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesirable operation.
   DATE OF ISSUE: October 15, 2019

TROUBLESHOOTING

If your rechargeable shaver does not seem to be taking charge, take the following troubleshooting steps before returning it for repair:

1. Be sure the electrical outlet is working by plugging in another appliance to test the outlet.
2. Make sure the electrical plug is not connected to a switch that turns the power off when lights are turned off.

OPERATING INSTRUCTIONS

BEFORE USE

1. When using the shaver for the first time, charge continuously for at least 12 hours for a full charge. Shaver can be operated for approximately 45 minutes with a full charge.
2. Plug the adapter into any wall outlet (at the voltage listed on the label affixed to the adapter). Unplug the adapter when not in use.
3. The adapter may become warm while charging. This is normal.

BASIC INSTRUCTIONS FOR USE

1. Men whose skin is sensitive or easily irritated by shaving, or who suffer from a skin allergy, should test one section on the leg or arm before using the shaver.
2. Remove the cover and turn on the unit to start shaving.
3. Move the unit very smoothly and slowly against the direction of your natural hair growth.
4. Do not push the shaver on the skin too hard as it could cause irritation, make the shaver warm and prevent a perfect shave.

NOTE: To switch the unit on, press down on the safety lock button and then slide the On/Off switch.

SIDEBURN TRIMMER

To use the sideburn trimmer:

• When the shaver is ready to operate, pull the trimmer release button downward to enlarge the trimmer.
• Switch the shaver on by sliding the On/Off switch.
• TIP: Hold the blades of the sideburn trimmer at a right angle to the area of the skin concerned. To shorten sideburns, first, comb them in the direction of the growth of the hair. Here again, you should hold the blades at a right angle to the head so that they touch the skin lightly and cut the sideburns by moving the shaver down away from the desired bottom edge of your sideburns.
• Switch the shaver off after every use (and where necessary, unplug it from the outlet). Press the sideburn trimmer back down to its original position and clean the shaver.

USER MAINTENANCE INSTRUCTIONS

TAKE CARE OF YOUR SHAVER

CAUTION!

•  To clean the external surfaces of the shaver, use a damp cloth. Do not use strong detergents or other chemicals.
• To dry, wipe the surface of the shaver with a dry towel. Do not use a hair dryer or heater to dry the shaver.
• The shaver should not be used until it is completely dry.

Daily Maintenance:

1. Press the release button on the front of the saver and open the head assembly (see Fig. 1).
2. Tap out excess hair shavings (see Fig. 2).
3. Use a cleaning brush to brush away any remaining debris (see Fig. 3).
4. Snap the head assembly closed (see Fig. 4).

Weekly Maintenance:

1. Repeat steps 1 – 3 from the Daily Maintenance cleaning steps.
2. Remove the cover from the hair pocket assembly (see Fig. 5).
3. Rinse the head of the shaver under running water. Thoroughly rinse away any debris from the inner and outer cutters (see Fig. 6). NEVER submerge the shaver in water.
4. Leave head open for drying.
5. Align the spring hinge into the slot at the back of the hair pocket and press it into place. Snap the head assembly closed (see Fig. 7).s.

To remove the rechargeable battery:

1. Unplug the shaver.
2. Run the shaver until the motor stops.
3. Remove the head from the shaver (press the release button and pull the head away from the shaver body).
4. Using a small screwdriver, pry the trimmer slide switch from the back of the shaver (see Fig. 1).
5. Remove one screw located under the trimmer slide switch. Remove the rear cover and two screws on the circuit board, then from the inner housing to expose the batteries. Pry batteries free from the circuit board and cut wires (see Fig. 2).
6. Properly dispose of batteries.
   This device uses one of the following types of rechargeable batteries: nickel metal hydride (Ni-Mh), nickel-cadmium (Ni-Cd), or lithium-Ion (Li-Ion). See included battery for indication of type.

CONTAINS NICKEL METAL HYDRIDE BATTERY. DO NOT DISPOSE OF MUNICIPAL WASTE.

SHV1000 RECHARGEABLE ROTARY SHAVER

LIMITED TWO-YEAR WARRANTY (U.S. AND CANADA ONLY)

Conair will repair or replace (at our option) your unit free of charge for 24 months from the date of purchase if the appliance is defective in workmanship or materials. To obtain service under this warranty, return the defective product to the service center listed on the back, together with your purchase receipt. California residents need only provide proof of purchase and should call 1-800-3-CONAIR for shipping instructions. In the absence of a purchase receipt, the warranty period shall be 24 months from the date of manufacture. so the above limitations may not apply to you.

IN NO EVENT SHALL CONAIR BE LIABLE FOR ANY SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES FOR BREACH OF THIS OR ANY OTHER WARRANTY, EXPRESS OR IMPLIED, WHATSOEVER. Some states do not allow the exclusion or limitation of special, incidental, or consequential damages, so the above limitation may not apply to you. This warranty gives you specific legal rights, and you may also have other rights, which vary from state to state.

Please register this product at www.conair.com/registration ©2020 Conair Corporation Service Center Conair Corporation Service Department 7475 North Glen Harbor Blvd. Glendale, AZ 85307

Download PDF

Get Manual